Инструкция стиральная машина daewoo dwd m8011a

							INSTRUCTION MANUAL
DWD-M8011/DWD-M8012/DWD-M8013
Washing Machine Instruction Manual
CONTENTSPage
A NOTE TO YOU
Thank you for buying a DAEWOO appliance.
DAEWOO washers are easy to use, save time, and help you manage your home better.
This manual contains valuable information about how to operate and maintain your washer properly and safely.
Please read it carefully.
Economic washing system
The washing machine determines the water level and washing time
automatically by sensing the amount of laundry and water temperature
in order to minimize energy and water consumption.
Low noise system
The washing machine minimizes the spinning noise level by sensing
the amount of unbalance of laundry.
Nano-silver sterilization washing(Option)
By applying very fine silver particles on essential parts inside, the
washer sterilizes up to 99.9% as is done by boiling wash.
Air bubble washing(Option)
This is an advanced technology that generates millions of air bubbles inside the drum on washing
sequence, and the bubbles dissolve the detergent particles completely and cleanse all the soil in
clothes gently and neatly.
PARTS AND FEATURES .................................................................................................................2
WASHER SAFETY ...........................................................................................................................3
INSTALLATION INSTRUCTIONS ....................................................................................................4
ELECTRICAL REQUIREMENTS .....................................................................................................6
OPERATING YOUR WASHER ........................................................................................................6
THE FUNCTIONS OF THE CONTROL PANEL ...............................................................................8
PROGRAMS AND FUNCTIONS ......................................................................................................9
WASHING PROCEDURE AND PROGRAM SELECTION .............................................................10
MAINTENANCE .............................................................................................................................11
HOW TO CLEAN THE FILTER ......................................................................................................12
REMOVING STAINS ......................................................................................................................13
TROUBLE SHOOTING ..................................................................................................................14
SPECIFICATION ............................................................................................................................15
 
						

							2
PARTS AND FEATURES
The parts and features of your washer are illustrated on the page.
Become familiar with all parts and features before using your washer.
Accessories
NOTE
The drawings in the book may vary from your washer model.
They are designed to show the different features of all models coverd by this book.
Your model may not include all features.
Inlet hose 
(Cold: 1EA, Hot: 1EA)Manual Sticker holder (3EA)Guide Hose Drain
(Option)
ADJUSTABLE LEG
CONTROL PANEL
DOOR
DETERGENT CASE
INLET HOSE (HOT)
(OPTION)
INLET HOSE (COLD)
COVER PUMP
POWER CORD
HOSE DRAIN
 
						

							3
Save these instructions
Your safety is important to us.
To reduce the risk of fire, electrical shock, or injury when using your washer adhere to the
following basic precautions.
Understanding your responsibilities
• Do not use chlorine bleach and ammonia or acid(such as vinegar or rust remover) in the same
wash. Hazardous fumes can form.
• Unplug power supply cord before attempting to service your washer.
• Do not wash fiberglass material.
Small particles can stick to fabrics washed in following loads and cause skin irritation.
• Do not spray water on the control panel of the washer.
It could cause fire or an electric shock.
• In case of the dual valve model, if you connect only one water inlet valve, the water leakage
from other water inlet valve(unconnected) can occurs.
• Flammable fluids (dry-cleaning solvents,
kerosene, gasoline, etc.) should not be used
or stored in or near your washer.
Do not add flammable fluids to your wash
water.These substances give off vapors that
can create a fire hazard or explosion.
• After starting a cycle, do not reach into the
washer until all motions stop.
• Do not tamper with the controls.
• The appliance is not intended for use by
young children or infirm persons without
supervision.
• If the supply cord is damaged, it must be
replaced by the manufacturer, or its service
agent or a similarly qualified person in order
to avoid a hazard.
• If the appliance is supplied from a cord
extension set or electrical portable outlet
device it should be positioned so that it is not
subjected to splashing or ingress of
moisture.Please ...
• Have only a qualified person install, repair, 
or replace parts on washer.
• Maintain washer properly.
• Protect washer from the weather and keep
it where the temperature will not fall below
freezing.
• Do not install the washer at a place of
extremely high humidity. It could cause an
electric shock or a short circuit.
• Connect washer to the correct outlet,
electrical supply, water supply, and drain
supply.
WASHER SAFETY
Read all instructions before using your washer
 
						

							4
Removing transit bolts
1. Before operating the washer, remove the transit
bolts(3ea) along with the rubber.
• If the bolts are not removed, it may cause
heavy vibration, noise and malfunction.
2. Unscrew the 3 bolts with the 10mm hex wrench
or spanner or cross-tip screwdriver. Keep the 3
bolts for a later time.
• When the appliance is transported, transit bolts
will be re-used.
3. Close the holes with sticker holders supplied.
Location of washer
• Check location where the washer will be installed. Make sure you have everything necessary for correct
installation.
• Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing.
• Do not place or store laundry products on top of washer at any times.
• Install the washer on the horizontal solid floor.
If the washer is installed on an unsuitable floor, it could make considerable noise,
vibrate severely and cause a malfunction. If the washer is not level, adjust leg up or
down for horizontal installation.
• Ventilation openings must not be obstructed by carpeting when the washer is
installed on a carpeted floor.
• Leave some space (right & left : 2cm, rear : 10cm).
• In case of built-in installation, the distance between top of the washer and bottom of
upper plate should be at least 3mm.
Inlet hose connection
• The washer should be connected to the water mains using new hose set and old hose sets should not be
reused.
• In case of only one water inlet valve, connect the inlet hose to the cold water tap.
• Periodically check the tightness of the inlet hose.
• Make sure that the inlet hose is not kinked or folded and that it is not crushed.
INSTALLATION INSTRUCTIONS
Laundry
Tub Washer
approx.
2cmDrain Hose
1. Connect the inlet hose
to the water tap tightly.2. Connect the inlet
hose to the water
inlet valve 
tightly.
 
						

							5
Drain system
• Never forget to install drain hose before operating your washer.
• Open the packing box, and the drain hose is tied at backside of washer.
• If you use the laundry tub, 
Top of laundry tub must be at least 60cm high and no higher than
100cm from bottom of washer.
• When installing the drain hose to tub(sink), secure it tightly with a string.
• Proper securing of the drain hose will protect the floor from damage due to water leakage.
• When the drain hose is too long,  do not force it back into the washer.
This will cause abnormal noise.
Level adjustment
1If the washer is installed on an
unsuitable floor, it could make
considerable noise, vibrate and
cause a malfunction.
 
2Adjust the level of washer using adjustable legs.
• Please check if there is any gap between the
four adjustable legs and the floor.
• Adjust the level of washer by turning
adjustable legs. And make it sure that there is
no swaying of washer.
• After the adjustment is finished, turn the fixing
nuts up tightly so that the washer maintains
the adjustment.
3Make it sure that the washer does not sway when you press
down the four corners of the washers top plate.
adjustable legFixing Nut
NOTE
There should be no swaying of washer and all the
adjustable legs should stick to the floor closely.
 
						

							6
Recommended earthing method
For your personal safety, this washer must be earthed.
This washer is equipped with a power supply cord ‘A’ having a earthing plug ‘B’.
To minimize possible shock hazard, the cord must be plugged into a mating
earthing-type wall receptacle ‘C’. If a mating wall receptacle is not available,
it is the personal responsibility and obligation of the customer to have the
proper earthed wall receptacle installed by a qualified electrician.C
B
A
ELECTRICAL REQUIREMENTS
• Electrical earth is required on this washer
• If it does not fit the outlet, have a proper outlet
installed by a qualified electrician.• Don’t earth to a gas pipe.
• Don’t change the power supply cord plug.
• Check with a qualified electrician if you are not
sure the washer is properly earthed.
WARNINGElectrical shock hazard : Failure to follow these instructions could result in
death or serious injury.
OPERATING YOUR WASHER
To obtain the best washing results, you must operate your washer properly.
This section gives you this important information.
• Close zippers, snaps, and hooks to avoid
snagging other items.
Remove pin, buckles, and other hard
objects to avoid scratching the washer
interior.
• Empty pockets and pull them inside out.• Turn down cuffs and turn synthetic knits
inside out to avoid pilling.
• Tie strings and sashes to avoid tangling.
• Treat spots and stains.
(See “Removing stains” on page 21) Preparing clothes for washing
 
						

							7
• Drop items into washer loosely. Items should move
easily through wash water for best cleaning and
wrinkle-free results.
• Load washer properly and select correct load size
setting.
Overloading and selecting a setting too small for
the wash load can :
- Cause poor cleaning
- Increase wrinkling
- Create excessive lint
- Wear out items faster (because of pilling)• Mix large and small items in each load. Load evenly
to maintain washer balance.
An unbalanced load can make the washer vibrate
during spin.
• Reduce wash time when using a small load size
setting. Load with only a few small items needs
less wash time.
• Use a large load size setting to reduce wrinkling
with permanent press clothes and some synthetic
knits. These items should have more room to move
in the water than heavy items. (towels, jeans)
Loading
1Detergent case2Adding fabric softener
• If desired, add measured liquid fabric
softener to the softener inlet.
• Pour liquid fabric softener into the
dispenser using the amount
recommended on the package.
• Do not exceed the maximum fill line.
Overfilling can cause early dispensing of the
fabric softener which could stain clothes.
• Do not open the detergent case when
water is supplied.
• Avoid pouring fabric softener directly on
the clothes. Adding detergent
• Separate heavily soiled items from lightly soiled ones, even if they would normally be washed together.
• Separate dark colors from light colors, colorfast items from non-colorfast item.
Sorting
Soil (Heavy, Normal, Light) Separate clothes according to amount of soil.
Color (White, Lignts, Darks) Separate white clothes from colored clothes.
Lint (Lint producers, Collectors) Wash lint producers and lint collectors separately.
Main washPre wash
Fabric softener
• Please use only the powder detergent for the front loader washing machine.
• Please use the proper amount of detergent in conformity with the instruction of the detergent manufacturer.
• A use of a large amount of detergent more than the recommended amount can cause many soapsuds and
the overload to the motor. In addition to, this will deteriorate the washing and rinse performance.
• If too much detergent used, it can occur that the detergent directly falls down to the inside cavity. In this
case, remove the detergent case and clean the cavity after washing cycle is finished. (See page 12)
 
						

							8
THE FUNCTIONS OF THE CONTROL PANEL
Program selector
For switching the washing machine on and off 
and for selecting the program.
Can be rotated in both direction.
Even if the program selector rotates while the program is running,
the program is not changed (except for off  ) .
(All program is electronically controlled by PCB)
Start/Hold button
For starting the washing cycle
(program must have been selected)
Button for options
(in addition to the program if required)
Intensive washExtended washing time.
Rinse +Extra rinse cycle.
Rinse HoldNo final spin cycle
• Combination of additional option is possible.
• The indicator lamp of the buttons lights up 
if options are active. 
• Switch off option : Press button again.
 
						

							9
PROGRAMS AND FUNCTIONS
Rinse : Rinse cycle with subsequent spin cycle for rinsing hand-washed items.
Spin : Spin cycle after a program with setting “Rinse hold” is finished or for spinning hand-washed washing.
Washing and rinsing water is drained before the spin cycle 
Drain : Water is drained after program with setting “Rinse hold” is finished. 
Intensive wash : The washing time is extended so that highly soiled laundry is washed more intensively. 
Rinse+ : Additional rinsing of laundry. Program duration and rinsing water is extended accordingly. This
help to remove residuary traces of detergent and  recommended in area with very soft water. 
Rinse Hold : For delicate textiles and net curtains. All program can be carried out without the final spin
cycle. The laundry is left in the final rinsing water. Before the laundry is unloaded, the “Drain” or
“Spin” must be run by using program selector.
Programs and functions
Program Proper
Temp.
Cold
40°C
60°C
60°C/Pre
95°C
30°C
Cold
40°C
60°C
60°C/Pre
Cold
40°CDegree
of soiling
Lightly 
soiled
Normally
to heavily
soiled
Heavily
soiled
Normally 
soiled
Lightly 
soiled
Lightly 
soiled
Normally
to heavily 
soiled
Lightly 
soiledOption 
Intensive wash
Rinse+
Rinse hold
Intensive wash
Rinse+
Rinse hold
Intensive wash
Rinse+
Rinse hold
Intensive wash
Rinse+
Rinse holdMax. 
Load
Rating
1.0kg
2.5kg
1.0kgRemark
First Check if 
laundry is
washable.
Short program 
(Fast washing) Fabric type
Colorfast garments
(shirts, night dresses,
pajamas…) and lightly
soiled white cotton
(underwear…)
White cotton, linen
and sheet….
Colored laundry.
Made of polyamide,
acrylic, polyester.
Machine washable
wool or wool-rich
textiles or silk.
 
						

							10
WASHING PROCEDURE AND PROGRAM SELECTION
Washing Procedure
• Turn the program selector to the desired program 
The indicator light of Start/Hold button is on.
• If required, press the button(s) for option(s).
The indicator light of the selected option button is on.
• Press the Start/Hold button.
The selected program starts and the indicator light of 
Start/Hold button twinkle.   
Changing the program
If you have accidentally selected the wrong program, follows next procedure. 
After washing
When the washing is complete, the indicator light of Start/Hold button is not twinkle but on.
• Turn the program selector to OFF .
• Press the Start/Hold button.
The selected program stops and the indicator light of 
Start/Hold button is not twinkle but on. 
• Turn the program selector to OFF and reselect
the desired program by using the program selector.
• If required, select the option(s). 
And press the Start/Hold button. The newly selected  
program starts