Explorer 700 bgan руководство пользователя

• Contents

• Table of Contents

• Bookmarks

Summary of Contents for Inmarsat EXPLORER 700

• MAKING A LAN CONNECTION To make a LAN connection, simply connect the LAN cable between your computer and one of the LAN connectors on the EXPLORER™ 700, and start up the EXPLORER™ 700 as described in the beginning of this document. As soon as the display of the EXPLORER™ 700 shows READY, the connection is established automatically. You are now ready to browse the Internet, check e-mails, send files etc. NOTE: For information on configuration, refer to the User Manual. SETTING

• 32526-EXPLORER700-GettingStarted-120×180 06/04/06 12:33 Side 3
  

• TT-99-123227-A · 04.06 OgilvyOne Thrane & Thrane A/S • [email protected] • www.thrane.com 32526-EXPLORER700-GettingStarted-120×180 06/04/06 12:32 Side 1
  

• 2. Place your Bluetooth device close to the EXPLORER™ 700. 3. On your Bluetooth device, search for new devices and select the EXPLORER™ 700 when it is found. The default Bluetooth name of the EXPLORER™ 700 is EXPLORER 700. 4. If there is more than one EXPLORER™ 700 in the list, you can use the MAC address to locate the correct one. To see the MAC address of your EXPLORER™ 700, enter the display menu system and select PROPERTIES > TERMINAL > HARDWARE > MAC ADDRESS. 5. On your Bluetooth device, enter the passkey o

• create a dedicated dial-up connection. In Windows XP, a dial-up connection is created as follows: a. Select Connect To from the Start menu. b. Select Show All Connections and open the New Connection Wizard. c. Go through the Wizard. d. If you are asked for a modem, select your installed ISDN modem from the list. e. Type in the phone number and password provided from your Internet Service Provider. f. When you h

• a. Using the built-in compass of the EXPLORER™ 700 antenna as reference, rotate and tilt the antenna so that it points in the approximate direction of the BGAN satellite. b. Use the displayed signal strength and the pointing sound to find the highest possible signal strength, while slowly rotating and tilting the EXPLORER™ 700. c. Press OK when you have obtained the highest possible signal strength. The EXPLORER™ 700 now starts to establish a connection to the BGAN networ

• 32526-EXPLORER700-GettingStarted-120×180 06/04/06 12:35 Side 12
  

• GETTING STARTED EXPLORER 700 TT-99-123227-A · 04.06 OgilvyOne 32526-EXPLORER700-GettingStarted-120×180 06/04/06 12:32 Side 2
  

• GETTING STARTED Congratulations on the purchase of your EXPLORER™ 700. Before you start, please check that the following items are present: • EXPLORER™ 700 transceiver with antenna • Two antenna cables for connecting the transceiver with the antenna • Battery • AC/DC adapter • LAN cable • USB cable • Getting Started kit including Quick Guide, electronic manual, etc. Insert the SIM card (provided by your Airtime Provider) The SIM slot is located behind the battery. a) Press the eject button at the SIM slot marked USIM #1 to release the SIM

• MAKING A USB CONNECTION To make a USB connection, do as follows: 1. Connect the USB cable between your computer and the EXPLORER™ 700. Note that the connector on the EXPLORER™ 700 is a USB Type B connector. 2. Start up the EXPLORER™ 700 as described in the beginning of this document. 3. If it is the first time you connect to the terminal using USB, insert the Thrane & Thrane CD ROM provided with your E

• Connect the cables Connect the cable(s), including the antenna cable, to the relevant connector(s) on the EXPLORER™ 700. The connector panel is located on the side of the EXPLORER™ 700. The antenna connector is located on the opposite side of the EXPLORER™ 700. Switch on the EXPLORER™ 700 Push the power button next to the display and hold it for a second until the green power indicator lights up. Enter the SIM PIN a) When you are asked for a PIN, press OK. b) Press  or  a number of ti

• Apevia

  X-Pleasure

  (All screws for M/B, DVD, HDD and case keys are provided in ascrew box that comes with the case) Finish look after installation.1. :Install motherboard, 3.5″ and 5.25″ drives1.1 Remove two thumb screws from the back of the side window1.2 Push the handle towards front panel a little bit, th …

  X-Pleasure Computer Accessories, 9

• Apple

  CD/DVD Drive

  073-0556 Rev. D ð Power Mac G4 / Macintosh Server G4 CD/DVD Drive Replacement Instructions Be sure to follow the instructions in this sheet carefully. Failure to follow these instructions could result in damage to your equipment and may void your warranty. Note: Written and video instructions covering customer-inst …

  CD/DVD Drive Computer Hardware, 8

• Xilinx

  CAST CZ80CPU

  January 2009CZ80CPU 8-Bit Microprocessor Core The CZ80CPU implements a fast, fully-functional, single-chip, 8-bit microprocessor with the same instruction set as the Z80. The core has a 16-bit address bus capable of directly accessing 64kB of memory space. It has 252 root instructions with the reserved 4 bytes as prefi …

  CAST CZ80CPU Computer Accessories, 2

• Saltillo

  TouchChat Express Series

  10144 Version 2.10 TouchChat® Express User’s Guide: English Open System and Dedicated Devices TouchChat Express 8 · 2nd Generation TouchChat Express 10 · 2nd Generation If you would like a Spanish version of this manual, please visit https://saltillo.com/support/downloads. Si desea una versi …

  TouchChat Express Series Conference System, 134

© 2023 Polaris Electronics. Use of this Site is subject to express terms of use. By using this site, you signify that you agree to be bound by these Universal Terms of Service. © 1999 — 2017BOOHOST Operating Company, LLC. All Rights Reserved.